-
Collection of Inventory Information Bridge inventory information can be collected at office or during inspections, which are commonly carried out after construction or reconstruction of a bridge but can also be done directly before condition as...
-
AWM Table : Bridges Attribute: Deck Wearing Surface Purpose: To provide... Value Description Photo Example Asphalt Ballast and rail Chip seal Cobble ...
-
AWM Table : Bridges, Causeway, Major Culvert, Tunnel Attribute: Latest Rehabilitation Type Purpose: To provide.... Value Description Photo Example Major Repair Strengthened Reconstr...
-
What data should be collected for bridges? The Bridge Data Dictionary outlines the data that must be collected and provided by suppliers carrying out activities that affect the Bridge table. This data is required to ensure that the objectives ...
-
AWM Table : Bridges Attribute: Secondary Member Type Purpose: To provide... Value Description Photo Example Beam A beam is a structural element that primarily resists loads applied laterally across ...
-
What is a Traffic Island? A traffic island is defined as an area between traffic lanes used to control traffic movements. It is typically characterised as a marked-off area with a vertical displacement, located either in the centre of or to the s...
-
This article demonstrates how to adjust the dimensions for a record. This may be needed when the actual length drawn is different from the calculated length (end location - start location) for the record. This is expected for records that either are...
-
General maintenance Here are some more tips to get the best performance from your camera: Always use the black lens cap to protect the lenses when you're not using your camera. The lenses are exposed to capture spherical content and are unpr...
-
The Approving Officer is the person responsible for signing off on the report to state that the information is accurate to the best of their knowledge. In most cases, this will be the PWM, but they may delegate this role to a PCE for example. I...
-
Open a record Click on the record on the map. If there are multiple records at that location, navigate through to the record you need using the arrow buttons on the bottom right of the pop-up. Click on the button on the left side of the pop-up t...