-
AWM Table : Bridges Attribute: Parapet Material Purpose: To provide... Value Description Photo Example Aluminium Concrete Masonry Steel Timber Steel a...
-
AWM Table : Bridges Attribute: Failure Mode Purpose: To provide... Value Description Photo Example Ductile Ductile failure occurs when a material is loaded beyond its yield strength. This causes the...
-
AWM Table : Bridges Attribute: Curvature Purpose: To provide.... Value Description Photo Example Horizontal Curve A horizontal curve is a section of roadway that changes the direction or alignment of...
-
AWM Table : Bridges Attribute: Analysis Method Purpose: To provide... Value Description Photo Example Preliminary Preliminary bridge analysis is the initial phase of a bridge's design, when the bridg...
-
Road structures are a key asset group in a road network. They often critical points of risk (a broken structure makes a whole road inaccessible) and require support from a specialist structural engineer to manage over the long term. Types of S...
-
The following sets out the network information that are to be managed in AWM . Core Network Information Road Names Carriageway Other Network Information Intersections Restrictions RiverCrossing Other Infromation Points of Inte...
-
Last Updated: 22/11/2024
in RMS Data Standard Road Network
This article describes how the network model is defined and then created and managed in AWM. Network Model Overview Within a road and transport context, a network supports and enables the movement of vehicles, goods and people. The road network...
-
Last Updated: 21/11/2024
in RMS Data Standard Road Network
This article sets out the detail around the centrelines as the spatial representation of the network. A centreline is the polyline spatial representation of an individual network segment or section. When combined together, these individual segme...
-
What is the Data Standard? The data standard is made up of three parts: A spreadsheet that sets out and defines the data tables that will be used in AWM A spreadsheet that sets out and defines the attributes in each of the data tables. Art...
-